How to reset your Luna AI camera.

If you need to reset your Luna AI Camera for troubleshooting, transferring ownership, or connecting to a different Wi-Fi network, follow these steps.

Keep in mind that resetting the camera removes all saved settings, including Wi-Fi credentials. After the reset, you will need to set up the camera from the beginning, unless you are connecting it to a different Wi-Fi network through WiFi option in camera settings screen.

Here's how to reset different types of cameras.

Indoor Camera

1. Turn on the camera by connecting to a power source using the adapter and the plug provided in the box
2. Slide the lens up to reveal the SD card slot and a reset button next to it
3. Use the tool provided in the box to press and hold the reset button until you hear the message, "Resetting Camera"
4. Reset is complete when the camera says, "Wlecome to your new camera..."

Light Bulb Camera

1. Turn on the camera by connecting to the power source
2. Slide the lens up to reveal a flap covering the SD card slot and reset button; the flap is labeled with 'SD Card' and 'Reset.'
3. Carefully open the flap to access the buttons.
4. Press and hold the reset button until you hear the message, "Resetting Camera"
5. Reset is complete when the camera says, "Wlecome to your new camera..."

Doorbell Camera

1. Turn on the camera by connecting to a power source using the adapter and the plug provided in the box
2. Locate the power button on the back of the camera
3. Press the button 3 times rapidly to reset the camera. You'll hear the message, "Resetting camera"
4. Reset is complete when the camera says, "Wlecome to your new camera..."
   
   

Bird Feeder Camera

1. Remove the flap on the top of the camera, toggle the ON/OFF switch to ON.
2. Locate the Reset button
3. Press and hold the reset button for 3 seconds or until you hear the message "Resetting camera"
4. Reset is complete when the camera says, "Welcome to your new camera..."

 
•